Lighting Control Panels

LIGHTING CONTROL PANELS

—– WILL BE UPDATED SOON —–

Panel preview

All Polar assembled panel boards are designed to meet the applicable industry standards and allow balance of the electrical load on each phase.

Application: Infrastructure, Industries, Oil & Gas, Aviation, Pumping Stations, Water Treatment, Hotels and Residential Buildings

Panel Features

  • Rated Operation Voltage up to 690V AC
  • Ranges from 800A to 6300A
  • Fault withstand 50KA / 3Sec
  • Form 2b, 4b type 6 & 4b type 7
  • Ingress protection of IP 54
  • Front or rear cabling access
  • Top or bottom cable entry
  • Metering instruments as per customer requirements
  • Incomer ACB’s & Outgoing ACB / MCCB’s as required
  • Incoming DOT & Outgoing with fixed / Plug in / DOT device
  • Automatic Transfer Control as required (Controller or PLC)
  • Incomer with DEWA/SEWA/FEWA/ADDC Kwh cutout
  • Incomer / Outgoing bus duct flange provisions
  • Utilization Category B for ACB & A for MCCB
  • Incomer & Outgoing devices with BMS facility if required

Benefits

  • Auto mains failure detection
  • Generator auto start/stop
  • Generator and bus voltage monitoring
  • Frequency monitoring
  • Reverse power relay trip protection
  • Auto load sharing
  • Alarm annunciation
  • Remote operation and monitoring
  • High level safety and reliability
  • Microprocessor based relay or PLC control for logic built-up

PANEL PHOTOS